Flat Gas Tank Inflation Valve Cylinder Gas Inflate Kit Outdoor Camping Butane Gas Refillable Adapter Cylinder Tank Coupler Valve

Specification:


Fuel: Gas


Usage Condition: Normal Outdoor


Structure: One-Piece


Piece Number Of Wind Deflector: No wind shield


Type: Switch Tool


Model: Flat Tank Inflation Valve
Name: Direct-connected flat tank inflation valve
Material: Copper, aluminum alloy
Color: As picture
Product size: About 115x110x20mm/4.53×4.33×0.79in
Net weight: 120g

Inflation steps and precautions
(note that the operation of liquefied gas is dangerous, please be sure
to operate in an open space outdoors and operate with care):
1. Install the empty bottle of the cassette gas tank on the inflation valve.
2. Confirm that the inflation valve switch is closed tightly.
3. Put the liquefied gas cylinder that meets the national standard
upside down on a stool or other stable table with a height difference of
more than 20CM (confirm that the switch of the liquefied gas cylinder
is closed tightly)
4. Install the inflation valve with the cassette air tank installed on the liquefied gas cylinder.
5. After the place is stable, first turn on the switch of the liquefied
gas cylinder, and then turn on the switch of the inflation valve to
start inflation (please control the inflation time, do not overfill, the
inflation capacity of the cassette gas bottle is generally recommended
to be within 200 grams, approximately After charging for a while, you
can take off the gas tank and weigh it to confirm whether the weight of
the gas tank is excessive).
6. At the end of inflation, first turn
off the switch of the liquefied gas cylinder, then turn off the switch
of the inflation valve, and then remove the inflation valve and the
cassette gas tank in turn.