Outdoor Gas Tank Inflation Valve Cylinder Gas Inflate Kit Gas Refilling Adapter Cylinder Tank Coupler Valve Camping Accessories

Specification:
Type: Pocket, Multi Tools
Name: Direct-connected cassette inflation valve
Material: Copper, Zinc Alloy, Iron
Color: Gold
Product size: About 97x70x68mm/3.82×2.75×2.68in
Net weight: 100g

Inflation steps and precautions (note that the operation of liquefied gas is dangerous, please be sure to operate in an open space outdoors and operate with care):
1. Install the empty bottle of the cassette gas tank on the inflation valve.
2. Confirm that the inflation valve switch is closed tightly.
3. Put the liquefied gas cylinder that meets the national standard upside down on a stool or other stable table with a height difference of more than 20CM (confirm that the switch of the liquefied gas cylinder is closed tightly)
4. Install the inflation valve with the cassette air tank installed on the liquefied gas cylinder.
5. After the place is stable, first turn on the switch of the liquefied gas cylinder, and then turn on the switch of the inflation valve to start inflation (please control the inflation time, do not overfill, the inflation capacity of the cassette gas bottle is generally recommended to be within 180 grams, approximately After charging for a while, you can take off the gas tank and weigh it to confirm whether the weight of the gas tank is excessive).
6. At the end of inflation, first turn off the switch of the liquefied gas cylinder, then turn off the switch of the inflation valve, and then remove the inflation valve and the cassette gas tank in turn.

Note:
The product is suitable for Eastern Europe such as Russia.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.